Facebook
Google
GitHub
LinkedinBlogs
Introduction:
For the past decades, we have seen technology evolved rapidly and how significantly impacts the world and human daily life. Most innovations and advancements of technologies uses electricity to operate especially when most of the things need to be done remotely.
Problem...
Background
Maritime being in high demand in logistics activity with having high volume cargo in one voyage. As the biggest role in logistic industry, sustainable and energy conserving in maritime transport will bring a big change in its aspects and a plus role to the climate change. Thus...
Temperature monitoring Device using MAX31889EVSYS:
As Hobbyist and IoT application design engineer I would like to use the MAX31889EVSYS Kit for designing the temperature monitoring device in horticulture shed. Temperature is the one of the important parameter where the plants get survived and...
In a month's period, I had accomplished calibrating the lighting system of the Home theater. There are so much things to do such as designing the android application graphical user interface (GUI) and interfacing a cooling system to the device. I actually received the device before the end of...
In this part of the blog, I used the Light Sensor installed in the SAM-IoT WG Development Board to determine the maximum light output and minimum light output for the LED to be used in the lighting system.
In the video, a LED light was light with maximum voltage to see the response of the...
In this project, I have used connection via SOFT AP. At the start, I was having a problem with why the board is not connecting to the network. There were two possible reasons that I discovered:
The board is only limited to connect to 2.4 GHz WiFi connection and since my WiFi is already 5G, it's...
After 1 month I was received the Microchip Technology SAM-IoT WG Development Board from All About Circuits.
I just realized this board is so amazing board with many benefit when using with Google Cloud. And easy to study the Google Cloud IoT service from Google.
So I decide to test all the...
Here are the materials needed in the implementation:
SAM-IoT WG Development Board
Temperature Sensor
Light Sensor
WiFi Module
LED Lights
Red
Blue
Green
Yellow
White
Mobile Phone
Introducing MAX38888 Evaluation Kit with ESP8266 NodeMCU
MAX38888 Evaluation kit is a super cap backup for power rail.
If there is a power failure the super cap will act as a backup for the power rail.
We will use the evaluation kit with ESP8266 NodeMCU with DHT11 as weather station using...
I got max31889 Ev kit as a give away for "Make with mouser IoT design contest".The board is evaluation kit for MAX31889 I2C sensor
the board have
+/- 0.3 degree accuracy
easy connectors for i2c interface to add more boards
matching pinout for pairing with MAX3263 FTHR board
MAX3263 FTHR board...
Entertainment has been the past time of many people amidst the ongoing pandemic because of several lockdowns. Most people tune in with their television to watch movies from different streaming service providers such as Youtube and Netflix. Amidst lockdown, many of us have shifted to go online...
Unfortunately in 2019 I decided to end selling on ebay.
There is many reasons to that.
I have left all my electronics things in the UK.
Now only recently I started over again from zero, bought a soldering station and some parts.
I have a new project. a 7segment LCD glass controlled by a...
This tutorial is originally posted on https://blog.gwlab.page/making-printed-circuit-board-pcb-e222952864d5
PCB design
This is a Printed Circuit Board (PCB):
A Printed Circuit Board (PCB)
In this article, I will give you some basic ideas about how to make a PCB. A PCB usually contains...
Hi all,
I am trying to improve the project I’m working on that has been developed to optimize the air quality. I did a lot of internet research but came to nothing.
It’s about a tube that is a revolutionary indoor solution for clean air. This system is capable to reduce harmful invisible...
---Tutorial under development---
LOPT preparation tutorial ---Volume {B}--- (Step 2-12 - end of document )
Last Action: Jan 23 2020
/////
Step 2-12) Prepare form guides
Prior to proceeding, it is imperative that the form pieces are absolutely free of adhesive residue, etc!
Tasks:
1) Trim...
---Tutorial under development---
LOPT preparation tutorial --Volume {A}-- (Introduction through step 2-11 )
Last Action: Jan 23 2020
/////
====Introduction====
Scope of series:
Central topics:
This tutorial is one in a (prospective) series with focus upon low ripple, medium current/power...
