Have a 24V 5A 2 wire DC motor which, when hooked up to 24v 20A Sola power supply runs great forward and when I reverse wires to power supply terminals runs in reverse just as well.
Placed a 12v 30A DC DPDT maintained switch with power supply to the middle terminals, cross wired the corner terminals, and connected 2 end terminals to motor.
When switch is toggled to the left, motor pauses briefly then runs well. Then after toggling to maintained off, push toggle to the right and motor has a 3-4 second pause before it reverses direction or will stall and not turn at all.
Have a 9-60V 40A PWM ordered, wanting to install a power drive on a cross table. Thought this would be easy straight forward. Any help greatly appreciated.
Placed a 12v 30A DC DPDT maintained switch with power supply to the middle terminals, cross wired the corner terminals, and connected 2 end terminals to motor.
When switch is toggled to the left, motor pauses briefly then runs well. Then after toggling to maintained off, push toggle to the right and motor has a 3-4 second pause before it reverses direction or will stall and not turn at all.
Have a 9-60V 40A PWM ordered, wanting to install a power drive on a cross table. Thought this would be easy straight forward. Any help greatly appreciated.