OK do that and see if that works.

do I have also to reconnect the lead of Q1?

 

Do not.

 

Do not.

ok so is done

 

ok so is done

do I have to start it now?

 

Yes start now.

 

Yes start now.

It does nothing now, no sound no click, not even on start up as before

 

Check your solder connections on D5.

 

It does nothing now, no sound no click, not even on start up as before

the diode was 100% shorted

Check your solder connections on D5.

ok I do

 

Which diode? The replacement for D5?

 

the diode was 100% shorted

ok I do

checked to me look fine, but I did it again an nothing, like before

 

Which diode? The replacement for D5?

no bro, the one we change

 

no bro, the one we change (the old one)

 

If the connections are good most likely C8 cannot charge high enough to turn Q2 ON.
Read the voltage on both sides of the replacement D5 and make sure the meter is in the DC voltage mode

 

[/QUOTE

If the connections are good most likely C8 cannot charge high enough to turn Q2 ON.
Read the voltage on both sides of the replacement D5 and make sure the meter is in the DC voltage mode

Ok

 

the voltage is 12,9 and zero the side with black line! please ignore my previous post

 

Try this again. What is the voltage on the diode lead with the black band?

 

12.9 volts on the black band lead?
First you said 1.4 volts now it's 12.9 what are you doing?

 

12.9 volts on the black band lead?
First you said 1.4 volts now it's 12.9 what are you doing?

yes

 

yes

I am tired I forget again to change the meter!! That's why i give wrong information!! Apology my friend

 

the voltage is 12,9 and zero the side with black line! please ignore my previous post

Those readings don't make sense. Is it 12.9 volts on the black band end of the diode?