Hello! Not sure if this is the right area but I’m looking for help or some ideas. I basically want to have 4 laser diodes for an alignment system for making T-shirts’ on my heat press. I seen these lasers (see pic) and want 4 without the 4 diff plugs. I know there has to be a way to join them all and have one plug? Thank you for any help or ideas. I’m gonna 3D print a stand to hold all for in a row just need to power them as one if possible instead of 4 plugs
Specs:
Product Description:
Wavelength:650(nm)
Output Power: 30(mW)
Beam Effect: Cross Line
Operation Model: CW
Ellipticity: 95%
Beam Quality(M2): 1.5
Power Stability: 5%(rms,over 4hours)
Warm up Time: 1(minutes)
Working Voltage: 5V
Working Current: 250mA
Size(mm): 16*68mm
Specs:
Product Description:
Wavelength:650(nm)
Output Power: 30(mW)
Beam Effect: Cross Line
Operation Model: CW
Ellipticity: 95%
Beam Quality(M2): 1.5
Power Stability: 5%(rms,over 4hours)
Warm up Time: 1(minutes)
Working Voltage: 5V
Working Current: 250mA
Size(mm): 16*68mm
Attachments
-
1.3 MB Views: 15
-
2.6 MB Views: 14
Last edited by a moderator: