This thread is now a "sticky thread" on the Technical Repair forum.
Since this is a frequent topic, this thread is a collection of posts and links on threadmill controllers, questions and fixes.
If you are making enquiries on repairing a threadmill controller, please start a new thread.
If you have new information to add, for example, photos of a control board that is not posted here, please start a new thread and we will append the new information to this thread.
Particularly, we are in search of a photo of MC-2100 REV 4 control board and any older versions not shown here.
Many of the summary posts are taken from this Technical Repair thread:
https://forum.allaboutcircuits.com/threads/mc2100-treadmill-motor-control-circuit.100678/
There are other threads on adding external speed control and on data communications which might be of interest to others. Links to these threads will be added later.
Since this is a frequent topic, this thread is a collection of posts and links on threadmill controllers, questions and fixes.
If you are making enquiries on repairing a threadmill controller, please start a new thread.
If you have new information to add, for example, photos of a control board that is not posted here, please start a new thread and we will append the new information to this thread.
Particularly, we are in search of a photo of MC-2100 REV 4 control board and any older versions not shown here.
Many of the summary posts are taken from this Technical Repair thread:
https://forum.allaboutcircuits.com/threads/mc2100-treadmill-motor-control-circuit.100678/
There are other threads on adding external speed control and on data communications which might be of interest to others. Links to these threads will be added later.
















































