Facebook
Google
GitHub
Linkedin
How cheap it's possible to a build an LCD Clock Now?
- Thread starter Shafty
- Start date
Is the above and the below same? (Please compare the prices). Not yet Dispatched from Amazon.in. Waiting for the comparison results...
https://www.electronicscomp.com/dev.../uno-r3-smd-atmega328p-board-compatible-india
I think the Micro-Controller is missing. Am I right?
No, it just uses an SMD version of the MCU.
Okay. Sticking with the original Amazon.in Order as we can easily put a new MCU later and program it different later too...
djsfantasi
- Joined Apr 11, 2010
- 9,237
Just remember, you’ll either need to program a new MCU with the boot loader or buy an MCU pre-programmed with the boot loader.
My Windows 11 PC not detecting my Board
Need Drivers for the same (Arduino UNO R3)
Please Help. Thanks
Search for CH340G drivers. This is the USB to UART chip on that particular board. I rarely run Windows without being forced to, and I don't have any experience at all with Windows 11, so I don't know if the drivers for that chip ship with the OS but I suspect they don't.My Windows 11 PC not detecting my Board
Need Drivers for the same (Arduino UNO R3)
Please Help. Thanks
If you look in Device Manager, you should see an unknown device which will be the USB interface from the CH340G. You may be able to use the Windows driver locating facility but I would just search for the drivers and download an installer.
Did you try installing drivers? Yes, of course it could be defective.
Tried all the ways. Need to conclude after checking in my friends laptop...
Absolutely correct and something that has bitten many a tinkerer. But the UNO is using a B connector and I have never seen one that didn’t have data lines.
Still, I have seen defective ones, so it is still a place to look.
drjohsmith
- Joined Dec 13, 2021
- 1,623
you might want to start a new thread,
re Arduino usage.
If you have a true arduino,
then go to the arduino web site,
https://www.arduino.cc/
go to download and download the ardino IDE
https://www.arduino.cc/en/software
install, and run ( latest 2.1.0 )
and you will find your board is detected,
dead simple and in my experience very reliable.
I have seen it with PC systems that are "highly modified", that the drivers have problems,
I have seen as other have said, cables are a problem
As the board is powered off the USB, that some PC's have broken power outputs,
I've not bought a new Arduino for a few years,we tend now to us the Teensey
but the boards normally in my experience come with a default program loaded,
that flashes the board led and sends a character to the serial port.
https://www.arduino.cc/en/Guide
dont cut corners , just because your already a Microsoft expert,
and it will pay you dividends.
