Ok thank you.Basically AM broadcasts the carrier signal all the time, even with no modulation, with the upper and lower sidebands (frequency and amplitude) determined by the modulation signal.
DSBSC suppress the carrier and broadcasts only the upper and lower sideband signal.
With no modulation, there is no carrier.
You can generate a DSBSC signal by multiplying the carrier signal by the modulating signal.
thank you, how can i coherently demodulate an overmodulated signal?
You can use an envelope detector for that also but the sound would be distorted, of course.I'm just curious how one can demodulate an overmodulted AM SIGNAL. I know you can use an envelope detector if it isn't overmodulated
|Thread starter||Similar threads||Forum||Replies||Date|
|V||PSpice - how to simulate NTSC video signal||Programming & Languages||0|
|A||Detect an Acitve Low signal||Digital Design||21|
|J||New to this! How to switch an Op Amp on using a DC signal||Analog & Mixed-Signal Design||21|
|Questions regarding Function Generator - AFG3000C||Test & Measurement||3|
|Open source Signal integrity (SI) for PCB||PCB Layout & EDA||0|