Hello.
I am trying to create, for a project, a 2:1 Multiplexer using CMOS Transmission gates. This MUX requires 2 transmission gates, so 4 total transistors. I have seen some implementations use an inverter when connecting the Select bus.
I am pretty bad at electronics. Take a look at my attempt so far and please let me know what to fix. I am simply trying to make a 2:1 Mux.
I am currently getting this error in LTSpice:
Singular Matrix: Check node nc_03
Attatched is my LTSpice attempted design
I am trying to create, for a project, a 2:1 Multiplexer using CMOS Transmission gates. This MUX requires 2 transmission gates, so 4 total transistors. I have seen some implementations use an inverter when connecting the Select bus.
I am pretty bad at electronics. Take a look at my attempt so far and please let me know what to fix. I am simply trying to make a 2:1 Mux.
I am currently getting this error in LTSpice:
Singular Matrix: Check node nc_03
Attatched is my LTSpice attempted design