I am tired I forget again to change the meter!! That's why i give wrong information!! Apology my friend

but I will stay don't worry

Those readings don't make sense. Is it 12.9 volts on the black band end of the diode?

yes it is on the black band end, checked 3 times

 

I know it's late at your place and we can continue tomorrow at 2PM your time if you want.

 

What was the voltage on the other end of D5?

 

What was the voltage on the other end of D5?

the reading is zero on that side. Tomorrow I will have time from 2 to 4, (english time) than I have to go to work..On the evening from 8, I’m tired, but I can’t stay a little bit more, if I don’t do stupid mistake of course. But don’t worry if you have to go, go! I don’t know how to thank you!!! I feel in debit my friend…

 

OK. just a couple of more things before we end this session. Read all the voltages on Q8

 

OK. just a couple of more things before we end this session. Check all the voltages on Q8

OK. just a couple of more things before we end this session. Read all the voltages on Q8

I have 12 volts on all 3 leads!

 

Exactly 12 volts on all three?

 

I have 12 volts on all 3 leads!

Exactly 12 volts on all three?

E 12.1 B 12.9 C 12.4

 

OK that's good it tells me Q8 is still fine.
You should have sound through the small speaker at this point even if the relay is not activated.

 

OK that's good it tells me Q8 is still fine.
You should have sound through the small speaker at this point even if the relay is not activated.

i'll try it, just a second

 

i'll try it, just a second

Yes it does!!

 

OK, the next thing is to order a MPSA42 (Q1) and a 5.1 volt zener diode (D5).

 

OK, the next thing is to order a MPSA42 (Q1) and a 5.1 volt zener diode (D5).

ok bro, I will order it before going to bed!

 

OK, we can continue the session when those parts arrive but feel free to ask any questions until then.

 

OK, we can continue the session when those parts arrive but feel free to ask any questions until then.

Ok, thank you very much, you r great!!!! Talk to you soon, have wonderful afternoon! Ciao

 

Ok, thank you very much, you r great!!!! Talk to you soon, have wonderful afternoon! Ciao

Hi, I got the diode, but it's smaller than the original, this one it's 5.1v 1/2w what are the old one? I can't figure it out from diagram! Could you only tell me if it will work or how many W is the original, so I can order another one. Thank you

 

1/2 watt should be fine.
The original might be a 1 watt.
I would not hesitate to use the 1/2 watt zener diode.

 

1/2 watt should be fine.
The original might be a 1 watt.
I would not hesitate to use the 1/2 watt zener diode.

Ok, thank you, still we have to wait for the other parts, will contact as soon I got it. here is 1am, I'm going to bed, have good day!

 

Ok, thank you, still we have to wait for the other parts, will contact as soon I got it. here is 1am, I'm going to bed, have good day!

Hi, I have the transistor, but unfortunately I wasn’t well on those 2 days, yesterday I did a covid test because last week I have been out with someone who have covid, and I get it, I’m positive! I don’t feel very well at the moment, please give some time to recover, and we con procede. I will contact you soon! Apology my friend

 

Sorry to hear that my friend.
No apology required. We will continue when you are well again. Take all the time you need.