I need to simulate an half-wave and a full-wave rectifier. For the full-wave we'll use the middle point transformer and the bridge format.
I have 2 questions:
1 - How do I simulate a middle point transformer and how do I calculate the value of primary and secondary inductance so that I can have the correct transformation ratio?
2 - What are the formulas to calculate Vout DC and V out RMS in terms of integrals???
I've seen, in a google seach, that \(\frac{N_{1}}{N_{2}} = \sqrt{\frac{L_{1}}{L_{2}}}\)
But how do I calculate L1 and L2 exactly???
If I have 230V for the primary winding and 6V for the secondary winding, what would be L1 and L2 values?
I get strange values of \(\left (\frac{230}{6}\right ) = \frac{L_{1}}{L_{2}} \Leftrightarrow 1469.4 = \frac{L_{1}}{L_{2}}\).
It means that I need to make L1 = 1469.4, L2 = 0.5 and L3 = 0.5???
I have 2 questions:
1 - How do I simulate a middle point transformer and how do I calculate the value of primary and secondary inductance so that I can have the correct transformation ratio?
2 - What are the formulas to calculate Vout DC and V out RMS in terms of integrals???
I've seen, in a google seach, that \(\frac{N_{1}}{N_{2}} = \sqrt{\frac{L_{1}}{L_{2}}}\)
But how do I calculate L1 and L2 exactly???
If I have 230V for the primary winding and 6V for the secondary winding, what would be L1 and L2 values?
I get strange values of \(\left (\frac{230}{6}\right ) = \frac{L_{1}}{L_{2}} \Leftrightarrow 1469.4 = \frac{L_{1}}{L_{2}}\).
It means that I need to make L1 = 1469.4, L2 = 0.5 and L3 = 0.5???
Last edited: