Hi E,hi C,
Do you have question?.
Are those results what you expected.?
E
PIC18 Simulator IDE ? What I have to do in the test ?Hi,
Can someone run this through the Oshonsoft simulator please?
Hi J,PIC18 Simulator IDE ? What I have to do in the test ?
Ok. I am checking.Hi J,
Ah yes!
It's at #21.
C
Hi J,Ok. I am checking.
Edit:
Nothing happens at the UART pins or RBx pins.
HiJ,How much time it needs ? If you are sure that the code is ok then I can test the .hex file in Proteus.
I tested after commenting both Enable and Disable. Nothing happens at RBx pins but If I comment ENABLE and Uncomment DISABLE then after some time one of the RBx pins turns green.
I got "Ready!" in the terminal window.
Yes, One of the RBx pins ON/OFF when string is sent but it takes some time. I will test it once more.HiJ,
It takes a few minutes.
No, I'm sure the CODE is not correct, and I'm trying to find out how to correct it.
"READY" should show in both test. If you are getting one of the RBX pins ON/OFF, then it is similar to mine.
I'll carry on going through the CODE.
Thanks, C.
Hi J,Yes, One of the RBx pins ON/OFF when string is sent but it takes some time. I will test it once more.
Hi J,Do you have any other file for testing. I said I tried commenting both ENABLE and DISABLE and also tried with uncommenting one of those at a time.
Any latest file regarding this project. Do you have OshonSoft softwares ?Hi J,
Leave ENABLE IN, as that's how it should run normally.
When you ask for another file. Do you mean on this project, or any file? If so then which PIC/s do you use?
C.