SIMPLE SOLUTION REQUIRED
Hi,
I have to find a way to check to make sure the 2 relays in the circuit which are connected in series work switch. I do not want to use any other source of power but 48V.
Is there a way using hardware the circuit can be tested.
Failure modes to consider are typically the relays getting stuck on contacts and not switching off. Meaning relays are stuck to the pole.
Is there a way to detect this???
Hi,
I have to find a way to check to make sure the 2 relays in the circuit which are connected in series work switch. I do not want to use any other source of power but 48V.
Is there a way using hardware the circuit can be tested.
Failure modes to consider are typically the relays getting stuck on contacts and not switching off. Meaning relays are stuck to the pole.
Is there a way to detect this???