Hello;
I have a question and your help would mean alot to me.
I want to install an x-ray indicator lamp that would use a relay switch. I have attached the schematics diagram of the circuit.
As you can see that pin 3 and 4 of the x-ray unit along with the 24 V DC input signal goes to the relay input , I assume the common and the indicator lamp is attached at the output end.
I don't know what kind of relay switch I should use it. Can you suggest any switch and the input/output port connections.
Thank you for your time
Ghani
I have a question and your help would mean alot to me.
I want to install an x-ray indicator lamp that would use a relay switch. I have attached the schematics diagram of the circuit.
As you can see that pin 3 and 4 of the x-ray unit along with the 24 V DC input signal goes to the relay input , I assume the common and the indicator lamp is attached at the output end.
I don't know what kind of relay switch I should use it. Can you suggest any switch and the input/output port connections.
Thank you for your time
Ghani
Attachments
-
19.5 KB Views: 8