All About Circuits

Reading the Analog Value using the ADC pins

P

Thread Starter

Prithvi10

Joined Apr 1, 2019
31
Hi,

I am using a Texas Instruments Microcontroller (TMS320F28335), I would like to read the analog value from circuit output to be read by the microcontroller using the ADC pins. Please help me in how to do this.

Thank you.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
M CT and Analog Ammeter low reading Test & Measurement 2
F Decrease a 0.20V signal down to 0.06V from analog sensor going to microcontroller for ADC reading without losing sensitivity range Analog & Mixed-Signal Design 14
D STM32F042 Reading ADC with Analog MUX 74HC4067 Microcontrollers 8
B Reading analog values from potentiometer through ADC in STM32F4 Discovery Board. Microcontrollers 2
I Digital/Analog Multimeter, Frecuency Limit in AC reading Test & Measurement 7
Similar threads
CT and Analog Ammeter low reading
Decrease a 0.20V signal down to 0.06V from analog sensor going to microcontroller for ADC reading without losing sensitivity range
STM32F042 Reading ADC with Analog MUX 74HC4067
Reading analog values from potentiometer through ADC in STM32F4 Discovery Board.
Digital/Analog Multimeter, Frecuency Limit in AC reading

You May Also Like

Top