hi every one[].
i am using dspic30f4011 to give totally 6 pwm pulses(two at a time) depending on the inputs in my motor(BLDC) control operation.
After dumping the program i tested. I used potentiometer(pot) to vary the pulse width.
at pot zero postion no pulse is coming but when i increased pot value all the six pwm pulses are coming at a time.
i need only two pulses at a time.
please tell me the reason why it is happening. please give me suggestions how to avoid this condition.
thank you..
i am using dspic30f4011 to give totally 6 pwm pulses(two at a time) depending on the inputs in my motor(BLDC) control operation.
After dumping the program i tested. I used potentiometer(pot) to vary the pulse width.
at pot zero postion no pulse is coming but when i increased pot value all the six pwm pulses are coming at a time.
i need only two pulses at a time.
please tell me the reason why it is happening. please give me suggestions how to avoid this condition.
thank you..