Hi readers,
I found this at Click here
This is an example of a disconnect and reconnect circuit using NE555. This means that the state of load will be (High, then, Low, them High). However, when I simulated using LT Spice it just give me (Low and High only). Does anyone know how to make the state of the load (High, then, Low, them High) when subjected to voltage change. For example, V2 below 12V, load is ON, then when V2 reach 12V, it will be OFF, then when V2 reach 15V, it will be ON again.
Is it possible to do this with NE 555 IC ? My LT Spice file below for reference
Attachments
-
1.5 KB Views: 0