LTSpice Simulation

Thread Starter

KronosX

Joined Nov 15, 2017
4
None of the substrate pins are connected.
You need to go back and connect them (their should be a connection dot at the junction)

And specify a voltage for Vdd
Hi,

Hmm all the substrate pins are connected to the source of the transistors. Which substrate pins are you referring? The voltage is not specified because I'm sweeping it as a variable from 0 to 10 Volts.
 

Attachments

eetech00

Joined Jun 8, 2013
3,856
Hi,

Hmm all the substrate pins are connected to the source of the transistors. Which substrate pins are you referring? The voltage is not specified because I'm sweeping it as a variable from 0 to 10 Volts.
No…they are not.
When they are connected there will be a connection dot shown.

you Can confirm this by viewing the resulting net list.
 
Top