I need help. I've read all I can find on here about this issue. I cannot find a service manual. Unit powers up for a second or so and shuts off. Only if he red led standby indicator is on. So I found a melted resistor. It seems to be in one of the transister driver circuits. I think. It's close to it anyways. So I removed it. Same situation. If I remove the two fuses for the 20v and 45v power supplies to the board. The unit will turn on and display like normal. But no sound. Anyways. I've tested transistors and every damn thing else I can find online to try. It straight up will melt a resister. Like red hot and burnt instantly. Please help.
Attachments
-
3.1 MB Views: 25