wht do you use for eyelet bolt mounts that are isolated on plastic or other non conductive material...
for instance wanting to join 2 eyelet 3/8 ends together on a bolt mount on the side of a piece of wood but not have any current pass thru the wood..

 

Google insulated eye bolt mount.

 

i mis spoke. I meant how do people put a wire with a ring end on a bolt mount mounted on wood
or metal...to join 2 wires together..but keep the bolt from touching the wood or metal..

 

https://www.hawkusa.com/manufacture...MIpJfvgOmx4gIVG7jACh0t1g7dEAQYAyABEgKph_D_BwE

 

nice product...overpriced

 

Just no pleasing you is there?

 

Use insulated wire? If bonding the 2 wires shrink wrap the bond up to the insulation. Not sure what you are trying to do...

 

Nylon shoulder washers: http://www.fastenercomponents.com/nylon-standard-shoulder-washers-p-27.html

Just no pleasing you is there?

Funny!

 

Nylon shoulder washers: http://www.fastenercomponents.com/nylon-standard-shoulder-washers-p-27.html



Funny!

It goes beyond what is here in the open.

 

Smaller versions in a TO-220 mounting kit.