Huba Control 16.2...33VDC / 0-10V Output (506.930A12101W -1...10Bar/OUT 0....10V) Pressure Transducer

Thread Starter

St3F_N

Joined Mar 23, 2024
1
Hi, hopefully someone can assist. The output 0-10V of transducer is connected to a controller however the controller is reading 2 Bar instead of the actual pressure of 4 Bar.( Reading 2 Bar under actual reading) Please advise what I can use to offset the output voltage of the transducer to the controller to increase the offset, thankyou
 
Top