I am having some trouble wiring these series of relays up. I have 8, DPDT 5amp relays. I have 3, 12v dc motors wired to them for forward and reversing motor direction, and the last 2 relays for lights and accessories. I have followed this guide over here at http://www.homebuiltrovs.com/brcs/BRCSWiringManual.pdf
However, I am not using a joystick, I am using 3 DPDT 6 pin switches instead of the SPDT switches in the wiring diagram below. Is it possible to do a similar setup, but with the DPDT switches instead of the SPDT 3 pin switches in the diagram? I don't have any SPDT switches at the moment. On the link below scroll to the bottom and it shows the switch setup if you're not using a joystick. Thanks.
https://www.homebuiltrovs.com/howtojoystickdpdt.html
However, I am not using a joystick, I am using 3 DPDT 6 pin switches instead of the SPDT switches in the wiring diagram below. Is it possible to do a similar setup, but with the DPDT switches instead of the SPDT 3 pin switches in the diagram? I don't have any SPDT switches at the moment. On the link below scroll to the bottom and it shows the switch setup if you're not using a joystick. Thanks.
https://www.homebuiltrovs.com/howtojoystickdpdt.html