I have a 48V lithium ebike. And i wanted to use reducer to power 12V custom made rear LED strip, and also to power wifi router when blackout comes. Probably will put 12V inverters to power stuff too.
So im planning to use my DC DC reducer 35V-70V to 12V output. There's 10A listed, but dunno does it 10A input or 10A out. And here is the reducer.
And, im planning to use this cable, not sure it's gauge, but probably 22AWG. The cable itself looks kinda same to reducer's cable,just a bit thicker.
The writing in cable is just : <> TUKUNI CABLE <> MADE IN INDONESIA
I also have another cable like this. This thickness nearly same with reducer's cable. But has no writings on it.
When i strip the BOTH wire(that tukuni and green cable) by wire stripper tool, it can be stripped at 1.6mm size.
Im going to attach a three pin molex connector on it.
Been trying to get a bigger wire, but the wire insulation cant enter the molex housing,also cant crimp it.
Here is the connector
So.. Does it work? (and also how to make a safe cabling, because reducer's red cable is for battery +, yellow is output 12V +, and black is common on both yellow and red. I dont have idea to make a branch on black. Maybe Y shape cable? A bunch twists and solder + heat shrink?)
So im planning to use my DC DC reducer 35V-70V to 12V output. There's 10A listed, but dunno does it 10A input or 10A out. And here is the reducer.
And, im planning to use this cable, not sure it's gauge, but probably 22AWG. The cable itself looks kinda same to reducer's cable,just a bit thicker.
The writing in cable is just : <> TUKUNI CABLE <> MADE IN INDONESIA
I also have another cable like this. This thickness nearly same with reducer's cable. But has no writings on it.
When i strip the BOTH wire(that tukuni and green cable) by wire stripper tool, it can be stripped at 1.6mm size.
Im going to attach a three pin molex connector on it.
Been trying to get a bigger wire, but the wire insulation cant enter the molex housing,also cant crimp it.
Here is the connector
So.. Does it work? (and also how to make a safe cabling, because reducer's red cable is for battery +, yellow is output 12V +, and black is common on both yellow and red. I dont have idea to make a branch on black. Maybe Y shape cable? A bunch twists and solder + heat shrink?)