DIY Microphone suggestions

bassbindevil

Joined Jan 23, 2014
824
A while back I wanted to record my voice, and I found the best results were from a Shure lapel mic clipped to my shirt. That was a lot easier than attempting to sound-deaden my room.
 

MrSalts

Joined Apr 2, 2020
2,767
It was a 6" pipe when @MrSalts suggested it, which would have resonances at 12 times those frequencies.
Actually, the mic is about 3-4" into the 4" diameter pipe because there is a foam plug in the bottom. The 1/2" of foam around the inside should dampen most resonances.
 
Top