Designing PCB with multiple RF circuits

Thread Starter


Joined Dec 7, 2011
I need Tips and recommendations on how to design a PCB with multiple RF circuits.
In my case, the PCB includes a GPS receiver, 802.15.4 2.4GHz, and 433 MHz transceivers.
  1. I plan to use a GPS module with a patch antenna.
  2. The 433 MHz transceivers will have a PCB or ceramic antenna. an external antenna for the 2.4GHz.
  3. What are the challenges I might face?
  4. What is the suitable PCB Stack?
  5. Power circuit, decoupling, and filtering?