Delay Timer using NE 555 circuit

AnalogKid

Joined Aug 1, 2013
10,065
It is suppose to be shorted (acts as a switch just like in diagram)
No, it isn't.

It is supposed to be turned on and off by V2 to simulate the switch in the diagram. You have a dead short wired across it, so it does nothing after the first timing cycle when power is applied.

ak
 

Thread Starter

MrsssSu

Joined Sep 28, 2021
199
No, it isn't.

It is supposed to be turned on and off by V2 to simulate the switch in the diagram. You have a dead short wired across it, so it does nothing after the first timing cycle when power is applied.

ak
Sorry my eye was blind that time :)
 
Top