usb c

I am trying to replace a usb C connector that snapped on a laptop power supply, there is a blue wire that needs to be connected to A5/CC1 (and also to B5/CC2 ?) would this type of connector work :

Hi all, I am trying to add a USB-C socket on my PCB that I would like to use for data transfer only. I currently have a simple UART molex connection, but I would like to upgrade it to USB-C in my next iteration of my PCB :) I am using the FT230X to convert it to UART as I want to use DMA...

Hi, I'm pretty new to all of this, so please let me know if something doesn't make sense. I am building display units with LEDs in them, powered by a 5v USB C to make it easy to disconnect and cable manage. I would like to put a USB C port on the left side of the unit, as well as another USB C...

Hi Every One , There is scenario where I have to use the USB C type adapter for my application device ( Microcontroller and Servo motor ) which draw a 5V and 1.8 A power max. I tried connecting the USB C type adapter but I observed below points a) I'm only getting the 480mA current through...

Hi all. I'm putting together a fairly simple project, imstalling a bluetooth amp in the shell of an old boonbox to power the speakers. For power delivery, I intend to use a lithium ion powerbank capable of supplying 20v via USB-C and a USB PD spoofer. The only problem is, the powerbank also...

Hi! I want to power an Arduino project with external, regulated 5V (say up to 1.5A). For versatility, I would like it to have a USB-C type input connector so I can grab any 5V charger I have laying around at the time of using it that can deliver at least 1.5A@5V. I read that connecting 5.1k...

USB was intended to be a universal data connection protocol and hardware standard, and has been passably successful in so becoming. However, the more I see of USB C the less I like it, especially solely as a power connection for SBCs such as Rpi. It's like using a steam-shovel to hammer a nail...

Hi, First post on this forum, so forgive if i'm not familiar with some of the do's and dont's. I have a Thunderbolt 2 to VGA connector which I wanted to convert to USB type C. I've very crassly sliced the connector open without thinking, which has led me to discover that both these structures...

Hi there, I am having issues with a standalone atmega32u4 project i've been working on and was hoping someone would be able to help :) I have designed a pcb that uses the atmega32u4 to recreate the arduino leonardo. I have been able to successfully burn the Arduino bootloader onto the chip...

Hi all. I'm currently designing a circuit using a CYPD3177 USB Type C Controller to change the output voltage of a USB C power supply with power delivery support. I was looking at the example schematic in the datasheet to understand how the chip is used but I'm struggling to get my head around...