I have an Adaptor with 2. Terminals and I need to hold 1. Wire to each Terminal.

The Wires are 22 AWG in Size so I thought I could use these?

Will these be ok?

https://www.amazon.com/gp/product/B07G5G7ZZG/ref=ox_sc_act_image_1?smid=A2Q8BVCOQW2D4A&psc=1

 

A little more detail as to what you are trying to achieve would help??

 

I am holding the Bair Ends of the Wire to the Terminals.

Would these Clamps be Conductive?

 

Aligator clip leads would be a far better choice.

 

Or one of the electrical clips on this page.

 

What sort of terminals?