Hi everyone
I want to buy an oscilloscope. I have two models in mind. One is the FNIRSI 1014D model and the other is the HANTEK-DSO-2C10 model. Which one do you think is better? Is the first model a good model and is it worth buying?
The specifications of these two oscilloscopes are explained in the following links:
https://www.tme.eu/en/details/dso2c10/digital-oscilloscopes/hantek/

https://www.amazon.com/FNIRSI-1014D-Dual-Channel-Oscilloscope-Generator-Bandwidth/dp/B097T5NRTZ

 

You do not mention what you intend to use the oscilloscope for, so I am not able to give you an opinion.
Is there anything in the specifications that you don't understand?

 

For a general-purpose entry-level scope this is what most people get:
1000Z Mixed Signal Oscilloscopes | RIGOL (rigolna.com)

Looks like the 200MHz 2-ch version is on sale for $300 US.

 

You do not mention what you intend to use the oscilloscope for, so I am not able to give you an opinion.
Is there anything in the specifications that you don't understand?

I mean more about the experience of using these devices and whether the specifications stated in the catalog are consistent with reality? I am especially interested to know about FNIRSI 1014D.

 

The 1014 has a built-in signal generator.

 

it would have to be the first one, as the second is “currently unavailable”

 

The FNIRSI is certainly a bargain if you need the signal generator as well and it is good quality, which I have no way of knowing.

The bandwidth and sampling rate are the same on both.

 

Look at the signal generator specs. I know that the one in my Siglent is voltage limited to less than my bench sig gen. It is handy for low voltage (5V or less) work.