Hey guys this is my first post so go easy. I was mucking around putting an argon solenoid into my welder and when i was testing some voltages i shorted a transistor.
Anyway...
I need some help tracking down what type of transistor i will need. The old transistor has some very difficult to read writing on it and that is as follws;
A2318 EJK25
And the welder itself is a BOC SmoothArc Multi Process 175
I’m hoping that the writing on that transistor means something to someone out there or that someone somewhere has seen this type of PCB before.
Thanks in advance for any advice or help.
Anyway...
I need some help tracking down what type of transistor i will need. The old transistor has some very difficult to read writing on it and that is as follws;
A2318 EJK25
And the welder itself is a BOC SmoothArc Multi Process 175
I’m hoping that the writing on that transistor means something to someone out there or that someone somewhere has seen this type of PCB before.
Thanks in advance for any advice or help.
Attachments
-
111.4 KB Views: 23
-
307.2 KB Views: 22