Hi everyone,
I'm having to use Simetrix and I do not like it one bit, I've been struggling all day to try and do something which I managed in 5min using Tina, however my university requires me to use Simetrix otherwise I'll fail.
All I want to do is inject 230V RMS into a transformer and get 23V RMS out the other side. Sounds simple, maybe with Tina, but not with Simetrix.
Whenever I create the very basic circuit I get DCOP failed. I then place resistors to ground on both sides of the transformer, and I manage to get it running and to get a signwave, but I'm getting 230V RMS in, and 40mV out.
Infuriating.
Like I said it should be 23V RMS o/p
I'm having to use Simetrix and I do not like it one bit, I've been struggling all day to try and do something which I managed in 5min using Tina, however my university requires me to use Simetrix otherwise I'll fail.
All I want to do is inject 230V RMS into a transformer and get 23V RMS out the other side. Sounds simple, maybe with Tina, but not with Simetrix.
Whenever I create the very basic circuit I get DCOP failed. I then place resistors to ground on both sides of the transformer, and I manage to get it running and to get a signwave, but I'm getting 230V RMS in, and 40mV out.
Infuriating.
Like I said it should be 23V RMS o/p