Universal Transformer-less AC 1PH Stabilizer

BobTPH

Joined Jun 5, 2013
11,519
Yes, if ACV mains is 50VAC then say it is found out in code how many triac blocks needs to be turned On at what firing angle(s) so that final voltage is always 220VAC fixed and pure sinewave and no any distortion.
This is total nonsense. There is no arrangement and sequence of switching a single 50 VAC AC source that will produce 220 AC. Throw in some diodes and capacitors inductors and you might have a chance. But not at 100% efficiency as you claim.

Bob
 
Top