Ultrasound Circuit Design needed

Discussion in 'General Electronics Chat' started by Shwetha Viswanath, Apr 27, 2016.

  1. Shwetha Viswanath

    Thread Starter New Member

    Apr 27, 2016
    I have a 1MHz piezo crystal through which i have to drive 2 Watt power. The resonant impedance is 7.6ohm. I have designed the circuit using arduino that produces 1Mhz but only 40mA. Can anyone suggest a current booster/driver circuit so as to increase current output from 40mA to 300mA.