Whilst I think this will work, I am certain that your expert comments will greatly improve my circuit.
Attached to P7 is a coil of titanium wire with resistance of about 6 Ohms; An ESP32 microcontroller with use PWM to control the amount of energy introduced into the coil to maintain a precise temperature based on feedback from a thermometer.
I hope for expert opinion as to whether this circuit will work.
Attached to P7 is a coil of titanium wire with resistance of about 6 Ohms; An ESP32 microcontroller with use PWM to control the amount of energy introduced into the coil to maintain a precise temperature based on feedback from a thermometer.
I hope for expert opinion as to whether this circuit will work.