Facebook
Google
GitHub
Linkedin
Hello everyone,
I'm working on the electronics of my FPV drone and faced an issue with one of my SpeedX 1804 3450KV motors. The inner plate relative to the outer plate doesn’t spin when I turn it by hand, unlike my other motors. It seems like this motor is broken.
I attempted to tear it down to see what’s wrong, but I couldn’t find any screws or obvious ways to disassemble it. I’ve attached a couple of photos of the motor for reference.
(Please note that there are only two wires visible in the photos. I cut one of the wires, which is out of the scope of this discussion and irrelevant to the current issue. So don't be surprised if you see only two wires.)
Can anyone guide me on how to tear down this motor?
Problem Solved: I had to pull harder because the magnets were holding on strongly.
I'm working on the electronics of my FPV drone and faced an issue with one of my SpeedX 1804 3450KV motors. The inner plate relative to the outer plate doesn’t spin when I turn it by hand, unlike my other motors. It seems like this motor is broken.
I attempted to tear it down to see what’s wrong, but I couldn’t find any screws or obvious ways to disassemble it. I’ve attached a couple of photos of the motor for reference.
(Please note that there are only two wires visible in the photos. I cut one of the wires, which is out of the scope of this discussion and irrelevant to the current issue. So don't be surprised if you see only two wires.)
Can anyone guide me on how to tear down this motor?
Problem Solved: I had to pull harder because the magnets were holding on strongly.
Last edited:
