Hi,Alright, I'll order similar replacements, but if I have time, I might try it both ways, to see what I can learn. Thanks everyone.
Depends what you're trying to accomplish. Beefing up the input caps is probably OK, but the output caps are actually part of a low pass filter.I have a vanilla boost switcher from ebay, caps on input & output look bad. Input is 1000uf @ 63v, and output is two 470up @ 100v.
Can I use larger, say 2200uf at 100v on for each? I have box of low esr electros I'd like to use with that rating.