I'm looking for suitable thru-hole resistors.
My requirements:
Found on search:
1. Vishay AC01-AT series, this is 1W and overkill. But I may consider
2.Ohmite OX series -- max temp is only 220 deg C
3.Caddock MS126 series -- 1/4W but way too expensive!
4. Vishay ALSR01 - rated 350 deg C, this is also 1W but I may consider
5. Ohmite 21JR series, rated 350 deg C, this too is 1W but I may consider
Any better recommendations? Thanks in advance.
My requirements:
- Operating temperature -- 25 deg C to 250 deg C or better
- Wattage >= 250mW.
- For low duty cycle pulsed operation, so not too worried about derating either.
- Resistance value - any in the range 1K to 100K
- Cost < $3
- Size: (desirable) length < 15mm
Found on search:
1. Vishay AC01-AT series, this is 1W and overkill. But I may consider
2.
3.
4. Vishay ALSR01 - rated 350 deg C, this is also 1W but I may consider
5. Ohmite 21JR series, rated 350 deg C, this too is 1W but I may consider
Any better recommendations? Thanks in advance.