Facebook
Google
GitHub
Linkedin
Hello ,based on the data sheet. the pulse is from Vcc as shown below.
i have done FFT to the impulse written in the data sheet shown below.
based on the FFT to what frequency range do i need to design my PDN?
Thanks.
https://www.qorvo.com/products/p/QPA2575#documents
i have done FFT to the impulse written in the data sheet shown below.
based on the FFT to what frequency range do i need to design my PDN?
Thanks.
https://www.qorvo.com/products/p/QPA2575#documents
Last edited:
