After a Software (MAINLY FREE, or Dam cheap) so i can DRAW Lines/O to a set distance.
Example centre of the circule is at 50,50 and its Radius is 15 (sorry for the spelling Dyslexic and it gets a pain after a while)
Basically i am wanting to make a 2 sided PCB, with holes to link each side, but its not a circuit more a graphic.
Also working on a small level the of about 30mm, so i need it to be able to lock within 1mm (not be calculated in pixels !)
This is what the graphic on one side looks like, i drew this in Second life, so its a 3D modle with No Real Hight to it
also needs to be smoothed out, with the gaps made smaller (due to the limits of second life in drawing) but i wanted some image of it
Example centre of the circule is at 50,50 and its Radius is 15 (sorry for the spelling Dyslexic and it gets a pain after a while)
Basically i am wanting to make a 2 sided PCB, with holes to link each side, but its not a circuit more a graphic.
Also working on a small level the of about 30mm, so i need it to be able to lock within 1mm (not be calculated in pixels !)
This is what the graphic on one side looks like, i drew this in Second life, so its a 3D modle with No Real Hight to it
also needs to be smoothed out, with the gaps made smaller (due to the limits of second life in drawing) but i wanted some image of it