Hey guys im currently in the design stage of a project, where im researching components to use and how to use them i just need some help with some basic questions about electronics as i have no practical experience yet and am uncertain in some aspects. Also ideas and pointing problems or errors that may occur are welcome.
The project is to basically build a cheap device that will combine two laser diodes, in the attachment i have made up a very basic schematic of the components im thinking about using (some are unnamed i can get the names if you wish), the wiring is also very basic and not how it will be connected.
My questions are what could i use in between the transformer and the components make connections easier, should i use a regulator between the fan and the power supply, could i expect any spikes that could damage the peltier plate from the temperature controller switching on and off, do you know any flat digital thermostats as the ones that come with the STC1000 are rounded (usually for aquariums and such). I was considering using the w1209 for a temp controller but am unsure how the supplied current will work with this module and havnt asked yet.
cheers
The project is to basically build a cheap device that will combine two laser diodes, in the attachment i have made up a very basic schematic of the components im thinking about using (some are unnamed i can get the names if you wish), the wiring is also very basic and not how it will be connected.
My questions are what could i use in between the transformer and the components make connections easier, should i use a regulator between the fan and the power supply, could i expect any spikes that could damage the peltier plate from the temperature controller switching on and off, do you know any flat digital thermostats as the ones that come with the STC1000 are rounded (usually for aquariums and such). I was considering using the w1209 for a temp controller but am unsure how the supplied current will work with this module and havnt asked yet.
cheers
Attachments
-
16.1 KB Views: 16