Facebook
Google
GitHub
Linkedin
The ribbon cable is too short and needs to be extended. It's for a DMD (DLP) chip.
Seems like an Hirose DF18, but not quite. https://www.hirose.com/product/en/products/DF18/
Ideally would like to be linked to a company that will sell a ready ribbon cable with male connector on one side and female on the other as perfect same lane length is important for this.
But even helping identify which connector this is would be very helpful.
higher resolution images: https://imgur.com/a/4pIu5
The dimensions of the female connector on the PCB are 18.5 mm x 3mm, there are 80 pins
Please let me know what other info I should provide if needed.
Thanks,
Francis
Seems like an Hirose DF18, but not quite. https://www.hirose.com/product/en/products/DF18/
Ideally would like to be linked to a company that will sell a ready ribbon cable with male connector on one side and female on the other as perfect same lane length is important for this.
But even helping identify which connector this is would be very helpful.
higher resolution images: https://imgur.com/a/4pIu5
The dimensions of the female connector on the PCB are 18.5 mm x 3mm, there are 80 pins
Please let me know what other info I should provide if needed.
Thanks,
Francis
Last edited:
