I am planning on rolling an electromagnetic coil using Magnet Wire, Enameled Copper Wire, 14 AWG, 10 pounds, 0.0655" Diameter, Red. - This will just be one large round coil basically. I need a transformer to power this with maximum amps/power/voltage that a 10 pound coil with these specs will support without overheating.
I eventually need/want a VFD (Variable Frequency Drive) to power this coil, but a Transformer with 40 hertz OUTPUT will work for now (whatever is cheaper as I'm short on cash).
Would someone provide me with the specs and equipment with links so I can purchase what i need for this? Im a software developer, not an electrical guy so I'm new to all of this. thank you for your help!
Nate
I eventually need/want a VFD (Variable Frequency Drive) to power this coil, but a Transformer with 40 hertz OUTPUT will work for now (whatever is cheaper as I'm short on cash).
Would someone provide me with the specs and equipment with links so I can purchase what i need for this? Im a software developer, not an electrical guy so I'm new to all of this. thank you for your help!
Nate