Need to build a circuit to split the turn signal and drl circuit on my car they both use the same wire and are controlled by the bcm. I have drawn up the schematic and just need help creating a delay circuit that will do what I want.
when the drl is on it supplies constant power to the wire which will be used as common on the relay and the trigger for the timer to latch the relay after 3-5 seconds
when turn signal is activated it will pulse 12v on-off until cancelled this should kill the power to the relay and cause it to unlatch
would like to use the fewest parts possible thanks for your help
when the drl is on it supplies constant power to the wire which will be used as common on the relay and the trigger for the timer to latch the relay after 3-5 seconds
when turn signal is activated it will pulse 12v on-off until cancelled this should kill the power to the relay and cause it to unlatch
would like to use the fewest parts possible thanks for your help