Hello everyone!!
I am using irs2103 to drive two transistors. My transistors are Mosfet irf510. They work fine in simulation.
The problem I face is ON THE BREAD BOARD. The High side is not working at all and the Low Side works some times. I am sending two square signals
AT THE SAME TIME with no phase shift to HIN and LIN and expecting on output: HO=High and LO= Low. I even tried different capacitors between Vb and Vs but achieved no where, still did not work. The frequency is not high, IRS2103 and IRF510 should work with it, it is less than 10 kHz.
Can some one help me, please??
I am using irs2103 to drive two transistors. My transistors are Mosfet irf510. They work fine in simulation.
The problem I face is ON THE BREAD BOARD. The High side is not working at all and the Low Side works some times. I am sending two square signals
AT THE SAME TIME with no phase shift to HIN and LIN and expecting on output: HO=High and LO= Low. I even tried different capacitors between Vb and Vs but achieved no where, still did not work. The frequency is not high, IRS2103 and IRF510 should work with it, it is less than 10 kHz.
Can some one help me, please??
Attachments
-
1.6 MB Views: 9
-
178.5 KB Views: 8