Hello,
I am trying to get a PCB design put together through a Fiverr contractor. I wanted to use the Makura 1SC-151 cellular modem IC instead of the SIM7600E. Does anyone know where I can get an IC Schematic for this chip? If I can't get a IC Shematic for this chip what can we do so that my contractor can design the PCB correctly to work with this chip.

Here is the link to the chip on DigiKey.com:
https://www.digikey.com/en/products...151/24762153?s=N4IgTCBcDaIIwGUDCBaOBWOIC6BfIA

Since I am new to this I don't know why he is asking me for a IC Schematic for this chip.
Any help would be greatly appreciate.
Best of luck in all of your projects!
Jerrad

 

EDA / CAD Models

https://www.arrow.com/en/products/lbad0xx1sc-151/murata-manufacturing
https://static6.arrow.com/aropdfcon...ef855c5d6c57542a23a36612/type1scdatasheet.pdf

 

EDA / CAD Models

https://www.arrow.com/en/products/lbad0xx1sc-151/murata-manufacturing
https://static6.arrow.com/aropdfcon...ef855c5d6c57542a23a36612/type1scdatasheet.pdf

Thank you for your help! It turned out that I needed a "Reference Schematic". I had to request it specifically from Murata. Now my PCB Designer can get back to work!
You are awesome thank you!

 

Thank you for your help! It turned out that I needed a "Reference Schematic". I had to request it specifically from Murata. Now my PCB Designer can get back to work!
You are awesome thank you!

Reference design is what it's usually called.