LT Spice Buck-Boost Converter Simulation help needed

Thread Starter

mishra87

Joined Jan 17, 2016
906
Hello All,

I tried to simulate to buck-boost for below requirement.

Vin = 2.5V-4.2V
Vout = 3.3V @500mA
Fsw = 250KHz

Could anybody help me where my simulation file is wrong ?

Thanks in Advance !
 

Attachments

Thread Starter

mishra87

Joined Jan 17, 2016
906
hi mishra,
This is your modified circuit, uses a 1A Schottky diode and 7R Load.
E
BTW: the BAT was the wrong way around for a +Vout.
Thanks for your reply !

If Vbat = 2.5V, how can i get Vout = 3.3V@500mA ?
If Vbat = 4.2V, how can i get 3.3V @500mA ?

My objective is design buck-boost to meet above requirement. I wanted to see boost behavior at 2.5V & Buck behavior at 4.2V.
Please share LT Spice file

I hope the requirement is clear to all of you ?

Thanks in Advance !
 
Top