Hey Guys.
I wonder who the best programmer for PIC's is?
Looking for regular here.
Me got a Job for anyone who is willing to spare some sometime.
Am willing to pay if the price is reasonable or adequate for me.
Job requires to write me a good code for a PIC.
I could start, so providing help is also better as I would learn.
I am asking specifically cause I know I would need help on this.
Application is for this.
Requirements for the code
1. Needs three push button for user input & two more for Start/resume & stop.
2. 7 Segment display to display two digits for count down time.
3. 7 Segment display to display temperature from 0 to 200° F.
( Display can alternate during the dry cycle every 2 seconds from time & temp, so that we won't need too many 7 Segs )
4. Need to monitor a thermistor input for temp measurement another 3 input to sense door open, tumbler rotation sense and over temp cutout sense.
Outputs can be logic out as it will drive a buffer for relay support.
5. In addition to the safety feature program should also monitor the Relay outputs so that fault diagnose can report error codes to indicate faulty relay contact terminal as I have seen the used relay contacts creating faults. Relay contacts are common to AC mains as it drives heavy duty contacters. Contact touch can be sensed by opto's.
# Error code display or indication codes can be customized to our needs.
6. Drive out are 4, controlling a Heater relay, Blower relay, 2 relays for Tumbler (CW & CCW). All 4 out are low for OFF and high for ON.
Any PIC can be chosen for the application.
All I need is someone to code the software, I will handle the rest.
I prefer to start the coding if someone is willing to provide help when I needed promptly. I cannot finish this soon without help and of course is the helper desires payment, it would be my pleasure or anyother favor is also fine. Just need someone to see this to the end.
If forum prefer please PM me. I would be glad to discuss the progress openly to others in a thread beside the code. Not that I do not want to give it out. I would share the code but after the consent from forum admin as I am not familiar with legal issues in other countries.
I am doing this because to help out the hospital. Buying new units in the near future is completely out of the question as they hospital now being privatized. I dunno why they are on such low budgets still.
Waiting fro replies soon.
I wonder who the best programmer for PIC's is?
Looking for regular here.
Me got a Job for anyone who is willing to spare some sometime.
Am willing to pay if the price is reasonable or adequate for me.
Job requires to write me a good code for a PIC.
I could start, so providing help is also better as I would learn.
I am asking specifically cause I know I would need help on this.
Application is for this.
Requirements for the code
1. Needs three push button for user input & two more for Start/resume & stop.
2. 7 Segment display to display two digits for count down time.
3. 7 Segment display to display temperature from 0 to 200° F.
( Display can alternate during the dry cycle every 2 seconds from time & temp, so that we won't need too many 7 Segs )
4. Need to monitor a thermistor input for temp measurement another 3 input to sense door open, tumbler rotation sense and over temp cutout sense.
Outputs can be logic out as it will drive a buffer for relay support.
5. In addition to the safety feature program should also monitor the Relay outputs so that fault diagnose can report error codes to indicate faulty relay contact terminal as I have seen the used relay contacts creating faults. Relay contacts are common to AC mains as it drives heavy duty contacters. Contact touch can be sensed by opto's.
# Error code display or indication codes can be customized to our needs.
6. Drive out are 4, controlling a Heater relay, Blower relay, 2 relays for Tumbler (CW & CCW). All 4 out are low for OFF and high for ON.
Any PIC can be chosen for the application.
All I need is someone to code the software, I will handle the rest.
I prefer to start the coding if someone is willing to provide help when I needed promptly. I cannot finish this soon without help and of course is the helper desires payment, it would be my pleasure or anyother favor is also fine. Just need someone to see this to the end.
If forum prefer please PM me. I would be glad to discuss the progress openly to others in a thread beside the code. Not that I do not want to give it out. I would share the code but after the consent from forum admin as I am not familiar with legal issues in other countries.
I am doing this because to help out the hospital. Buying new units in the near future is completely out of the question as they hospital now being privatized. I dunno why they are on such low budgets still.
Waiting fro replies soon.
Last edited: