Hi everybody,
I'm using this controller for my half bridge LLC converter:
https://www.st.com/resource/en/datasheet/l6599a.pdf
the spice model does not exist and the datasheet don't tell how they manage to got the gate drive H and L behinde the VCO
i have built the VCO according to the datasheet:
a got this in CF:
my question is how can i have a gate signal from the signal in CF
GA have to be on when the capacitor charges, and GB have to be on when the capacitor discharges
I'm using this controller for my half bridge LLC converter:
https://www.st.com/resource/en/datasheet/l6599a.pdf
the spice model does not exist and the datasheet don't tell how they manage to got the gate drive H and L behinde the VCO
i have built the VCO according to the datasheet:
a got this in CF:
my question is how can i have a gate signal from the signal in CF
GA have to be on when the capacitor charges, and GB have to be on when the capacitor discharges
