All modes of SGL8022W are toggle mode, ie every time you need a touch to switch off or on.
Is there a way to make it into a momentary switch, where default is off and on touch it fades in and it fades out when touch is removed?

 

Probably not a simple way to produce a fade function. What sort of application do you want, and what voltages are involved? Very few folks participating are mind readers here. AND, in addition, I am not willing to take any guesses as to the actual results that are desired.

 

Probably not a simple way to produce a fade function. What sort of application do you want, and what voltages are involved? Very few folks participating are mind readers here. AND, in addition, I am not willing to take any guesses as to the actual results that are desired.

Hi MisterBill2,
Sorry for leaving so many things vague in the question, i wasn't sure if someone was going to reply,

I want to make something like this

https://youtube.com/shorts/qRWbTtpNObM?si=Ih7hD9qJwUuadrSU

I am using 5v led strip,
5v power supply,
I used TTP223 for touch activation,
But there's just led On/Off,
No fading effect,

There is touch PWM fading with SGL8022W,
But all the modes are just toggle modes,
If it worked momentarily like TTP223 , it would be perfect with the fading on and off.

 

What you will find here is that the better the question the better, and faster, the answers. So if you post a very clear question folks jump up with"I know how to do that", while a foggy question it is more like "Wait until it gets clarified a bit." Or even ignored because of being incoherent.