Hi, I like to integrate a foot switch in a circuit to control two separated double solenoids via a selector switch. E.g. position "A" lets me control "UP" side of the "1" solenoid via the left side of foot switch and "DOWN" side via the right side foot switch; position "B" lets me control "2" solenoid with same foot switches. Solenoids are 120V 23 Watt.
I have successfully made a circuit to control one double solenoid via a 120V coil relay (D7PA2 series relay) and the foot switches, but can't for the life of me get the other to work using a second relay.
Attached is a sketch of what I have done. Excuse the non schematic layout. Any pointers would be much appreciated. Thanks. https://app.box.com/s/z1s2np4jxkr420pyte1phiujxxwlznzi
I have successfully made a circuit to control one double solenoid via a 120V coil relay (D7PA2 series relay) and the foot switches, but can't for the life of me get the other to work using a second relay.
Attached is a sketch of what I have done. Excuse the non schematic layout. Any pointers would be much appreciated. Thanks. https://app.box.com/s/z1s2np4jxkr420pyte1phiujxxwlznzi