I bought this motor from Amazon and am finding it difficult to make the connections Please I need help.
The motor did not come with Capacitor, I was planing to use 10uf 400v Capacitor with it but dont know how where the capacitor connections goes and direct connection.
Marathon D162 48Y Frame Open Drip Proof 48S17D2087 Belt Drive Motor, 1/2 hp, 1725 rpm, 115 VAC, 1 Split Phase, 1 Speed, Ball Bearing, Resilient Ring Mount

https://www.amazon.com//gp/product/B0042GKRRE/ref=ox_sc_act_title_1?smid=A2L77EE7U53NWQ&psc=1

 

Datasheet shows a connection diagram -

http://www.electricmotorwholesale.com/index.cfm?fuseaction=product.download&fileId=135627

Regards, Dana.

 

Datasheet shows a connection diagram -

http://www.electricmotorwholesale.com/index.cfm?fuseaction=product.download&fileId=135627

Regards, Dana.

Yes. And it seems like a basic motor.

 

@chrisniger
Welsome to AAC.

The D162 does not require you to add a capacitor for starting: http://www.swdrives.com/HVAC Motors.pdf
If you are in the US, you would attach the black (or any non-green, non-white) lead to terminal 4 (call it L1). The white goes to terminal 1 (L2), and the green goes to one of the case screws.

Directions of CW rotation are given in the pdf. You reverse the yellow and blue linesin the motor.

Is that plastic piece with the push-on connectors broken? Has the motor been used?

 

Thank you guys.the diagram provided work. I connected it direct and it worked. Thanks a bunch guys. I am grateful.